QuickPay settings and eligibility rules
Use this article to look up every QuickPay setting: the advance rate, the processing fee and minimum fee, the company limit, blackout days, failed-attempt blocking, who is eligible, and the checks an employee must pass. It also lists every message an employee can see when QuickPay is refused, and what each one means.
KAMI manages these settings for you, because KAMI's lending partner advances the money. There is no QuickPay settings page in KAMI. To change one, email quickpay@kamiworkforce.com.
Where: set by KAMI, on request
You need: to be authorised to agree QuickPay terms for your company
How to change a QuickPay setting
- Decide what you want changed, using the tables below. For example, "make QuickPay available to the Operations department only" or "add a blackout from the 25th to the 28th".
- Email quickpay@kamiworkforce.com from an admin account, naming the company.
- KAMI confirms the change. It applies from the next time an employee opens QuickPay.
- Ask one affected employee to open Get paid now to check what they now see.
How to stop one employee using QuickPay
- Email quickpay@kamiworkforce.com with the employee's name and employee ID.
- Say whether the block is for a set time or until further notice.
- From then on the employee sees "Sorry, your QuickPay has been disabled. Please contact your administrator." when they try to claim.
Amount and fee settings
| Setting | What it does | Default for a new company |
|---|---|---|
| QuickPay on or off | Whether employees can claim at all. Off hides the Team Benefits › QuickPay tab and the employee cards | Off |
| Advance rate | The share of the employee's estimated net pay so far this cut-off that they can take. KAMI's policy caps it at 40% | 40% |
| Processing fee | A percentage of each request, taken from what the employee receives | 3.5% |
| Minimum fee | The least any one claim costs. Whichever is higher, the percentage or this, is charged | PHP 90 in the Philippines, IDR 25,000 in Indonesia |
| Minimum allowed advance | An amount an employee can always take, even when the advance rate gives less. It also becomes the smallest claim they can make. 0 means off | 0 (off) |
| Smallest request | Fixed in the app, not a setting: requests start at PHP 1,000 in the Philippines and IDR 300,000 in Indonesia | Fixed |
| Maximum outstanding | The most QuickPay that can be outstanding for the whole company at once, across all employees. Blank means no limit | No limit |
KAMI can also set a different minimum allowed advance, wage or set of checks for one employee.
How the numbers combine
- Available = advance rate × estimated net pay so far, or the minimum allowed advance if that is higher, less any QuickPay the employee has not yet repaid.
- Fee = the request × the processing fee, or the minimum fee if that is higher.
- Sent to the employee = the request − the fee, rounded down to a whole unit.
- Deducted from the payslip = the request.
The estimated net pay is what the employee's payslip would pay for the current cut-off up to today, after contributions, tax, recurring deductions and loan instalments due on it. It is 0 for anyone without a wage, without a batch cycle, or on a yearly, quarterly or one-time cycle, so they can't take anything.
Protection settings
| Setting | What it does | Default |
|---|---|---|
| Maximum failed attempts | Failed claims allowed in the failure window before the employee is blocked | 3 |
| Failure window | The hours the failed claims are counted over | 24 hours |
| Block duration | How long the block lasts | 24 hours |
| Blackout periods | Days of each month when QuickPay is off for everyone, such as payroll processing days | None |
A failed attempt is any claim that is refused, for whatever reason, including asking for too much.
Eligibility settings
Who can claim. By default every employee can. KAMI can limit QuickPay to employees in any of these, and an employee in any one of the chosen groups qualifies:
- Employment types
- Departments
- Positions
- Branches
- Subsidiaries
- Profile groups
- Cost centres
KAMI's checks. Everyone who qualifies must also pass these checks. KAMI can change the numbers for your company or for one employee.
| Check | Default |
|---|---|
| Minimum length of employment | 90 days from hire date |
| Paid payslips | At least 2 paid payslips in the last 75 days |
| Check-ins | Attendance check-in required on the profile, and at least 15 valid check-ins in the last 30 days |
| Absences | No more than 3 absent days in the last 30 days |
| Probation | Not on probation |
| Disciplinary action | No active disciplinary action |
KAMI can switch its checks off, but only for testing.
Messages employees see
When a check fails, the employee sees "Sorry, unfortunately you are not currently eligible for Kami QuickPay, as" followed by the first reason below.
| Message | Cause |
|---|---|
| QuickPay is not activated for your profile. Please contact your HR or Admin. | Not in an eligible group |
| You have not been employed for over 90 days. | Too new. The number is your company's setting |
| Profile doesn't have hire date set. | No hire date on the profile |
| You are still under probation. | On probation |
| You have an active disciplinary action. | Active disciplinary action |
| you have not been paid at least 2 payslips in the last 75 days. | Too few paid payslips |
| You need to be required to check-in attendance regularly. | Check-in not required on the profile |
| You have not regularly checked-in to work recently. | Too few valid check-ins |
| You have too many recorded absences. | Too many absent days |
These appear when the employee tries to claim:
| Message | Cause |
|---|---|
| QuickPay is temporarily unavailable. Please try again later. | Blackout period |
| QuickPay is not available on your company. | QuickPay is off or suspended |
| Sorry, your QuickPay availability is being reviewed and will not be available again for at least the next 24 hours. | Blocked after failed attempts |
| Sorry, your QuickPay has been disabled. Please contact your administrator. | Blocked by KAMI until further notice |
| Sorry, your QuickPay limit is currently under review. Please try again later. | The company's maximum outstanding is reached |
| Please update your personal bank details in KAMI to proceed. | No bank or bank account number on the profile |
| The bank of the profile is not supported by Disbursing Entity for fund transfer. | KAMI can't pay out to that bank |
| Requested amount exceeded the allowed limit. | More than the available amount |
| Requested amount is lower than the fixed QuickPay fee. | The request is no more than the fee |
| The minimum QuickPay request amount should be at least … | Below the minimum allowed advance |
| Your final payslip has already been processed, so there is no payroll left to deduct a QuickPay from. | A leaver whose final payslip is done |
What Happens Next
- Changes apply at once, the next time an employee opens QuickPay. Advances already taken keep the fee they were taken at.
- A blocked employee is unblocked automatically when the block duration ends.
- QuickPay switches off by itself if a repayment to KAMI stays unverified five days after its payment date. See Repaying advances.
Tips
- Start with a narrow eligible group and widen it. Taking QuickPay away from people is harder than extending it.
- Set blackout days around payroll processing. Claims made while a batch is being calculated cause most payslip surprises.
- Use the minimum allowed advance carefully. It lets people take money they have not yet earned this cut-off.
Troubleshooting / FAQ
Q: Can we raise the advance rate above 40%? KAMI's policy caps it at 40%.
Q: Everyone is refused at the start of a cut-off. Estimated net pay is low in the first days, so the available amount can be below the smallest request. It grows with each day worked.